Pre-wired single N type socket with mounting plate

12N type socket assembly

With 2m of 7 core cable, flexible gasket and metal mounting plate

Complete with wiring instructions

Pre-wired N type socket assembly 

Comes with 2m of 7 core cable, flexible gasket and metal mounting plate

12 volt seven way universal by-pass relay with audible buzzer

A 7 way bypass relay is connected directly to the vehicles lighting circuits to control the lights on a trailer and caravan. The relays do not put any extra load onto the vehicles lighting system. The relays also feature a built in audible buzzer that monitors the trailer and caravan indicators. All bypass relays can be powered using either the battery or the fuse box.

Works on most vehicle types and most filament bulb and LED lamp combinations

Differentiates circuits on dual voltage tail/brake and tail/fog systems

Monitors indicators / flashers via the internal buzzer, which mutes under hazard warning conditions

Ancillary flasher/indicator monitor output to panel lamp or additional buzzer

Made in the UK

Instructions included

Pre -wired 12N socket assembly

with 2m of 7 core cable, metal mounting plate and flexible gasket

10 x Snap connectors

Audible relay (suitable for vehicles without bulb failure systems - if in doubt consult an auto electrician)

It is a legal requirement to have either a visual or audible monitor fitted so the driver is aware that the indicators are working on a trailer or caravan

Fitted at the rear of the vehicle the relay gives an audible signal that is in sequence with the towed vehicles indicators / flashers

Easy to read standard colour codes

Easy to conceal within the vehicle

Excellent sound clarity, loud and high output

Complete with wiring instructions 

N type socket assembly with cable and flexible gasket  

Complete with 2m cable

Plus three fixing bolts

Pre-wired 12S type socket assembly

With 2 meters of 7 core cable, flexible gasket and metal mounting plate

Used for caravan fridge, etc

Complete with wiring instructions

Vehicle may require additional relay

S type socket assembly with cable and flexible gasket  

Complete with 2m cable

Plus three fixing bolts

S type socket converstion kit

S type gasket

Quick fit conversion plate

2 Sets of nuts and bolts

Convert your single N type 7 pin electrics to N and S with this conversion kit, the quick fit plate simply bolts to your exsisting mounting plate, extra bolts included for the N socket

Pre-wiried S type socket 2M converstion kit

Quick fit conversion plate

Nuts and bolts

Convert your single N type 7 pin electrics to N and S with this conversion kit, the quick fit plate simply bolts to your exsisting mounting plate, extra bolts included for the N socket

Pre-wiried S type socket 2M converstion kit and split charge relay

Quick fit conversion plate

Nuts and bolts

Convert your single N type 7 pin electrics to N and S with this conversion kit, the quick fit plate simply bolts to your exsisting mounting plate, extra bolts included for the N socket

30amp automatic dual charging relay, self switching

Charging relays are suitable for 12S electrics and will charge a caravan leisure battery and/or power the fridge while the vehicle is running. It also protects the vehicle battery from draining when the engine is turned off

Combination caravan relay with automatic voltage monitoring and switches the power supply from car to caravan

Self switching voltage sensor relay

Provides power for refridgerator and charges auxillary battery

Automatic monitoring of voltage and current availability from car's alternator/battery

No separate signal wire necessary

Able to switch 30 amp continuously when available from car's alternator/ battery

Adjustable factor set voltage trip with narrow band hysteresis

Over temperature protection

Line voltage drop (around 0.1v) at rated output

Made in the UK

Instructions included for both 7 and 13 pin systems

Pre-wired N & S type socket assembly

N type with 2 meters of 7 core cable

S type with 2 meters of grey 7 core cable

Both pre-wired and fitted with gaskets

Mounted on a double plate to fit standard UK flange type towbars

Complete with wiring instructions

N and S type 13 pin socket assembly

Pre-wired 13 pin socket with 2 x 7 core N and S cables using a twin hole gasket

Converts vehicals fitted with seperate N and S sockets to a single 13 pin socket

13 pin pre-wired socket assembly 12 core

With 2m sheathed cable

Suitable for all caravans and trailers with 13 pin electrics

Supplies all required lighting functions and supplementary power / charging circuits

Suitable for vehicals where direct connection of towing electrics may effect bulb failure monitoring, multiplex wiring or other electronic systems. Powered separately from the power circuits the device virtually draws no power from the lighting circuits.

Many new cars now require dedicated wiring kits, please check with a dealer if you are unsure.

13 pin pre-wired socket assembly 12 core

With 2m sheathed cable

Suitable for all caravans and trailers with 13 pin electrics

Supplies all required lighting functions and supplementary power / charging circuits

13 Pin Pre-wired Socket with Sheathed Cable

30 Amp Self-Switching Dual Charge Relay (See LMX522 for more info)

12V 7 Way Bypass Relay (See LMX595 for more info)

5m x 2mm Red Core Cable

5m x 3mm Black Core Cable

5 x 2mm Black Trailer Cable

0.5m x 0.75mm White Core Cable

9 x Blue Snap Connectors

4 x Yellow Pre-insulated Blade Terminals

4 x Blue Pre-insulated Ring Terminals

2 x In-line Blade Fuse Holders

15 Amp Blade Fuse

25 Amp Blade Fuse

Yellow Pre-insulated Ring Terminal

Instructions included

Note: Cable lengths quoted are approximate

Suitable for vehicals where direct connection of towing electrics may effect bulb failure monitoring, multiplex wiring or other electronic systems. Powered separately from the power circuits the device virtually draws no power from the lighting circuits.

Many new cars now require dedicated wiring kits, please check with a dealer if you are unsure.

13 Pin 2m 7 Way Bypass Relay Wiring Kit with PCT ZR2500 Relay & 30A Combination Relay

30A Self Switching Combination Relay (See LMX522 for more info)

PCT ZR2500 Logicon relay (See LMX3660 for more info)

5m x 2mm red core cable

5m x 2mm black trailer cable

9 x Blue Snap Connectors

4 x 6.4mm Blue Pre-insulated Ring Terminal

1 x 8.4mm Yellow Pre-insulated Ring Terminal

4 x 6.4mm Yellow Pre-insulated Blade Terminal

2 x Inline Blade Fuse Holder

1 x 15 Amp Blade Fuse

1 x 25 Amp Blade Fuse

Instructions included

Note: Cable lengths quoted are approximate

13 pin pre-wired socket assembly 12 core

With 2m of 12 core cable

For the connection of caravan / trailer towing electrics

The 13 pin wiring system (ISO11446) is now standard on European caravans, from 2009 model UK caravans and most European cars. Includes road lighting, reverse, battery charging and caravan refridgerator circuits

Socket with strong moulded body, water seals, gasket and convenient screw terminals

Complete with mounting gasket and fixing screws

Pre-wired with 2m of high specification 12 core cable (pin 12 is not used for caravan electrics)

Assembled in the UK

May also be used to convert old 12N & S vehicle installations to the new standard

13 pin style pre-wired towing socket assembly

With 2m of 8 core cable

For the connection of trailer towing electrics

Socket with strong moulded body, water seals, gasket and convenient screw terminals

Complete with mounting gasket and fixing screws

Pre-wired with 2M of 8 core cable, NOTE: This is the new style 13 pin socket but with 8 core cable so can only be used for the lighting system (including reverse if fitted) for trailers with the new style 13 pin plugs. There is no wiring for caravan fridge, charger, etc

Assembled in the UK

May also be used to convert old 12N vehicle installations to the new standards

Flexible N type socket gasket

Suitable for part no: LMX460

Flexible N type socket gasket

Suitable for part no: LMX505

Flexible S type socket gasket

Suitable for part no: LMX537

Twin entry gasket to allow entry of the 2 cables

Ideal for 13 and 7 pin electrics

Made from flexible PU

3 x socket fixing nuts and bolts M5 x 35mm

Towbar socket nuts and bolts

Fits standard 7 pin S and N sockets and standard 13 pin socket to mounting plates

Pack of 3 suitable for 1 socket

Metal single towing electrics socket mounting plate

3 socket mounting holes suitable for 12N or 12S 7 pin socket or new 13 pin sockets

1.75mm thickness

Corrosion resistant ED coating

Fits standard flange type towbars (does not fit detachable or swan neck towbars)

Metal single towing electrics mounting plate

3 socket mounting holes suitable for 12N or 12S 7 pin socket or new 13 pin sockets

2.0mm thickness

Corrosion resistant ED coating

Cut out enables changing of plate without the need to unwire the socket, cable can pass through the cut out

Fits standard flange type towbars (does not fit detachable or swan neck towbars)

Metal double towing electrics socket mounting plate

2 x 3 socket mounting holes suitable for 12N or 12S 7 pin sockets

1.75mm thickness

Corrosion resistant ED coating

Fits standard flange type towbars (does not fit detachable or swan neck towbars)